Panasonic 1M Скачать руководство пользователя страница 106 | Manualshive

Страница: 106 / 134

Panasonic 1M Скачать руководство пользователя страница 106

106

Record Management

Introduction (list of record management items)

I t e m

Description

Page

Visitor Record

108−111

General

Announcement

112

Emergency

Announcement

112

▼

▼

Manager Room

108−111

▼

Voice Mail

108−111

▼▼

●

Visitor Record, Manager Room, Voice Mail, Emergency Announcement, and General Announcement

are provided as record management items. For details about each item, refer to the following table.

Use this feature to play back recorded audio/video data of
the Main Entrance, the Unit Entrance, and the manger
room that are recorded manually, automatically or while
you are absent. You can also use this feature to delete
unnecessary records one by one (individual deletion).
The maximum number of recordings that can be saved is
approximately 16 when no SD memory card is inserted, and
approximately 1000 when an SD memory card is inserted.
The number of maximum record items depends on the
capacity of the SD memory card.

Use it to play back a recorded emergency announcement.
Only one item can be recorded. The maximum recording
length is 3 minutes.

Use it to play back a recorded general announcement.
Only one item can be recorded. The maximum
recording length is 3 minutes.

Use it to play back voice data recorded manually or as
voice mail. Also you can use it to delete unnecessary
record data one by one (individual deletion).
The maximum number of recordings that can be saved is
approximately 16 when no SD memory card is inserted,
and approximately 500 when an SD memory card is
inserted (including voice mails).
The number of maximum recordings depends on the
capacity of the SD card.

Use it to play back recorded voice mails sent from the
Manager Room. You can also use it to erase unnecessary
record data one by one (individual erase).
The maximum number of recordings that can be saved is
approximately 16 when no SD memory card is inserted,
and approximately 500 when an SD memory card is
inserted (including recordings in the Manager Room).
The number of maximum recordings depends on the
capacity of the SD memory card.

7.Windea̲取説（英語）̲1M.indd 106

7.Windea̲取説（英語）̲1M.indd 106

2012/09/06 17:03:51

2012/09/06 17:03:51

«
...
104
105
106
107
108
...
»

Содержание 1M







































































































































Отзывы:

Нет отзывов