（
*1
）
Ringtone Volume
Touch Sound
Setting
Description
Default
Page
This sets whether to emit a ring for a general announcement.
Earthquake Setting*
1
Ringtone
Excuse Tone
Away-from-home
Message
This sets the answer message for when you are not at home.
High
On
On
Medium
Accept Calls
Telephone 1
30 sec.
Fixed message 1
Fixed message 2
Yes
No
Imitation Sound
Setting according to your preferences
46
You can set the ringtone volume etc. according to your preferences.
52
-
53
54
55
-
57
This sets the ringtone and number of rings when a call is made.
58
-
60
61
-
64
Yuttari On/Off
This sets whether always to use Yuttari when calling.
Off
60
Sen
Ringtone
General
Announcement
Volume Setting
This sets the volume when a call is made from the Main
Entrance, the Unit Entrance or the manager room.
This sets whether to emit touch sounds when the touch panel
is operated or a button is pressed.
This sets the volume of the earthquake alarm for Intensity 4,
Intensity 3 and Erroneous reports.
Lobby Phone: Melody 1
Number of rings: Ring continuously
Entrance
(Unit Entrance): Melody 2
Number of rings: Ring once
Manager Room: Melody 4
Number of rings: Ring continuously
This sets the ringtone and number of rings that sound when a
call is made from the Lobby Phone (Main Entrance), the
entrance (Unit Entrance), or the Manager Room.
Sound Setting
Received
Call Time
Reject
Calls
This sets whether or not to receive messages from the housing
information board of Other Units.
This sets the Received Call Time when a call is made from the Main
Entrance, the Unit Entrance, another Unit or the Manager Room.
Melody 5
Number of rings: Ring once
This sets the excuse sound emitted from the Master when the
excuse function is used. (Excuse function page 31)
Pretend To Be
Out Message
Not-home Setting
Pretend To Be
Out Indicator
This sets the answer message that plays from the Master when you are
using the Pretend to be out function. (Pretend to be out function page 32)
This sets whether to activate a function which,when a call is
made by a visitor, displays on the screen and, in
response to an operation, plays the Not-home message.
(Pretend to be out function page 32)
Security Number
Setting
This sets the private security number for disarming the security
alarm and security alert.
Security Off
Sound
Security Setting
Security Alarm
Delay
Security
Preliminary
Alarm
This sets whether the Master emits a sound when the alarm is
set or disarmed on the security system.
This sets the time between the security alarm being set and the
system entering the alarmed state. (A time can be set for each
security system.)
●
This can be set if the "Permit changes to delay setting" is set
to "Yes" in Installation Setting.
For further information please contact the store responsible
for installation or the service and maintenance company.
●
If the "Permit changes to delay setting" has been set to "No",
the "Security Alarm Delay" indicator does not appear.
This sets the time between the Security system being tripped
and the Security Alert (Security Preliminary Alarm) sounding.
(A time can be set for each security system.)
●
This can be set if the "Permit changes to delay setting" is set
to "Yes" in Installation Setting.
For further information please contact the store responsible
for installation or the service and maintenance company.
●
If the "Permit changes to delay setting" has been set to "No",
the "Security Preliminary Alarm" indicator does not appear.
Security 1/
Security 3/
Security 4: No
Security 2:
60 seconds
Security 1/
Security 3/
Security 4: No
Security 2:
60 seconds
Security Setting
P
Num
SD Setting
Return Home Notification Setting
（
*1
）
Ex
Initialize
*1: N
resp
Note
Note
Note
Accepting
calls from
other
apartments/
Ringtone
7.Windea̲取説（英語）̲1M.indd 46
7.Windea̲取説（英語）̲1M.indd 46
2012/09/06 17:03:36
2012/09/06 17:03:36