32
B
Convenient Functions
Displaying Images from the Separately Installed Camera (Switch Button)
Pretending to Be Out Function
1
Touch when called
Note
Touch
When you do not want to answer a call, you can play an absence message with the Pretending to
be out setting. You can change the content of the absence message or record it with the
“Pretending to be out setting” ( pages 58 to 60).
The absence message is played for the caller.
At the end of the message, there is a beep,
and you can REC or record the message of
the visitor. The REC or recorded message can
be played back later. ( Page 109)
Receiving a Call
When two cameras are installed at the lobby door, is displayed on the screen.
By touching while being called or talking, you can switch visitors’ images.
(You can also switch by touching the sub-screen.)
The screen switches to the other one. To return
to the original screen, touch again.
You cannot adjust images on the separately
installed camera.
By touching before touching ,
you can record the image of the visitor.
( Page 25)
By touching before touching ,
you can enlarge the image of the visitor for
confirmation. ( Page 28)
Touch while being called or
while talking
Convenient!
If the number of recordings that have not
been played exceeds the maximum
number of recordings possible, no data
response is available after that.
Play back the unread recording screen.
( Page 109)
Note
7.Windea̲取説（英語）̲1M.indd 32
7.Windea̲取説（英語）̲1M.indd 32
2012/09/06 17:03:33
2012/09/06 17:03:33