PalatiumCare Palcare PAL-211401, Инструкция по установке

Страница: 28 / 64

Copyright © 2018 PalatiumCare, Inc. Page 28
2018
Notes : A location cannot be removed if there are devices or residents assigned to the location.
Wireless Repeaters
Overview
Wireless Repeaters are used to increase the distance between Location Devices or Resident
Devices and the Wireless Receiver. Wireless Repeaters need to be registered with the
PalatiumCare Server, just like any Location or Resident devices, so the system knows to monitor
the Wireless Repeater for loss of communication.
Registering Repeater
1. Ensure Repeater Battery plug is plugged in, and power light is on.
2. Login as Tech Support .
3. Click on the Wizard Tab.
4. Click on the Update Repeaters Button.
5. Click on the Add New Device Button.
6. Click on the Ready Button.
7. Press the Reset Button on the Wireless Repeater.
8. Verify the Serial # on the screen matches the one on the Wireless Repeater.
9. Click on the Ok, Register It Button.
10. Type in where Repeater is being placed in the Location frame.
11. Click on the Save Locations Name Button.
Update Repeater Location
1. Login as Tech Support .
2. Click on the Wizard Tab.
3. Click on the Update Repeaters Button.
4. Click the Wireless Repeater Location.
5. Type in the new location.
6. Click on the Save Locations Name Button.
Remove Repeater
1. Login as Tech Support .
2. Click on the Wizard Tab.
3. Click on the Update Repeaters Button.
4. Check box on the far left for the Wireless Repeater that will be removed.
5. Click on the Remove Device Button.