PalatiumCare Palcare PAL-211401 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 64

PalatiumCare Palcare PAL-211401 Скачать руководство пользователя страница 17

Copyright © 2018

PalatiumCare, Inc.

Page 17

2018

4.

If mounting the PalatiumCare UL2560 Comark PC. S

ecure the PC stand with 3 #8 x ¾”

screws onto the System Mounting Board.

Note

: When installing the PalatiumCare UL2560 Comark PC as part of the PalatiumCare

System then the Paging Transmitter will no longer be required as part of the system installation.

Mounting Wireless Repeater

Overview

Mounting the Wireless Repeaters can be done in a couple ways. Orientation does not affect the
range or signal strength. Repeaters can be mounted horizontally next to an outlet, or vertically
underneath the outlet for different circumstances. Repeaters can also be mounted away from an
outlet when a secure mounting location is not available.

Learning Wireless Repeaters into PalatiumCare System

Overview

Wireless Repeaters are used to increase the distance between Location Devices or
Resident Devices and the Wireless Receiver. Wireless Repeaters need to be registered
with the PalatiumCare Server, just like any Location or Resident devices, so the system
knows to monitor the Wireless Repeater for loss of communication. PalatiumCare
suggests learning these into the system prior to continuing. See setup information
Ethernet Etc.

Wireless Repeater Power

Wireless Repeaters used with the PalatiumCare System are powered with a 12VAC power supply
and have an internal battery backup. Since the main power supply is AC power polarity can be
reversed with no effect. To connect the power supply to the repeater, a section of 18-2 wire is
needed.

«
...
15
16
17
18
19
...
»

Содержание Palcare PAL-211401

































































Отзывы:

Нет отзывов