otometrics Madsen AccuScreen PRO, Руководство пользователя

Страница: 33 / 98

AccuScreen PRO User Manual Preparing for testing
GN Otometrics A/S 33
5 Preparing for testing
5.1 Connecting the probe
Applies to all AccuScreen PRO versions and all types of tests.
1. Plug the probe plug into the "Ear probe" socket on top of the
AccuScreen PRO. Align the red dot on the probe plug with the
red dot above the socket of the AccuScreen PRO. The plug
does not require force to be inserted properly.
Disconnecting the probe
To disconnect the probe, hold the sleeve of the plug and
release it by pulling it backwards.
Caution:
Do not pull the plug by the cable when you disconnect the
probe.
The probe will not be released if you pull anywhere else than
on the sleeve of the plug.
5.2 Connecting the electrode cable for ABR testing
Applies to AccuScreen PRO A, TA, DA, TDA.
• Insert the ABR cable plug in the provided socket. Make sure
that the red dots are aligned.
Disconnecting the electrode cable
Caution:
Do not pull the plug by the cable when you disconnect the
electrode cable.
5.3 Connecting the Y-cable for ABR testing
For ABR-measurements you can use either the ear probe or the Y-ca-
ble with Ear Couplers. A major advantage in using the Y-cable is that
once the test starts, both ears will be tested consecutively.