Opex FalconV, Руководство пользователя

Страница: 87 / 130

Operation 87
FalconV User Manual - Standard Scanning - OPEX Corporation
Page Sub-Type Select (IdAssist only) The page sub-type selection function is
useful in jobs that have a page type with many page sub-types. Use the trigger
to bring up the page sub-type selection screen so you can choose from among
the available sub-types (Yes, No).
Note: When using the “Page Sub-Type Selection” IdAssist function, you must
select the sub-type before the item enters the scanner. If a page sub-type
is not selected, the item will be assigned the default page sub-type. If no
default page sub-type has been assigned, the item will be rejected.
Override feed control
This function allows you to disable multifeed detection
for thicker pieces that may not pass through normally (Yes, No).
Packet Swipe
A stack of items (more than one item) is required for this function.
Packet Swipe allows a stack of items to be processed as 1 set or 1 group
where all single items in the job are processed as 1 set or 1 group.
Deactivate Page Type Override this function allows you to deactivate any
Locked Page Type Overrides (Yes, No).
About the Multi-slot ID Assist
The optional Multi-slot ID Assist is identical to IdAssist, but offers up to nine
different preassigned functions per job. Note that when Multi-slot ID Assist
usage is defined in a job, IdAssist is disabled, since the two systems use
different operator/piece tracking methods.
Figure 28: Multi-slot ID Assist
The Multi-slot ID Assist has three slots, each offering three different function
selections. Depending on how the item is moved in these slots will trigger the
predefined function. The three methods to select specific functions per slot are:
Three slots