Opex FalconV, Руководство пользователя

Страница: 121 / 130

Statistics 121
FalconV User Manual - Standard Scanning - OPEX Corporation
Last
Transaction
Not Complete Results when the current transaction does not fit the defined
transaction criteria and a piece is identified as a page type
that defines a new transaction.
Current
Transaction
Already
Complete
Results when a transaction has met its defined criteria and
a new piece that is not defined to start a new transaction is
identified.
Batch Ticket
Not Expected
Results when a piece is identified as a batch ticket after
valid pieces are already included in the batch unless auto
batch mode is in use.
Ran Out of
Time
Processing
Image
Results when the software has run out of the time that it has
available to process a particular image. The amount of time
it has available depends upon track speed.
Could Not
Detect
Document
Edges
Results when image processing is unable to detect the
edges of an item that has been scanned.
No Page Sub-
Type Selected
Results when a piece is identified as one with page sub-
types and no default page sub-type has been specified and
the operator did not make a page sub-type selection.
ScanLink
Plug-in
Requested a
Reject
Results when the ScanLink plug-in has requested that the
piece be rejected.
ScanLink
Plug-in Timed
Out Results when the host has not received a response back
from the ScanLink Plug-in within the required amount of
time.
Could Not
Create a Batch
Results when the software was unable to create a batch
due to an inability to open and write a new file or an error
within the system.
Detected a
Duplicate
Batch Results when the software has detected a duplicate batch
either via the used batch list or by finding batches in the
batch directories with the same batch number.
Table 10: Reasons for rejected items (continued)