Opex FalconV, Руководство пользователя

Страница: 66 / 130

66 Operation
FalconV User Manual - Standard Scanning - OPEX Corporation
Scanning tips
Make use of these techniques for properly handling paper and feeding items:
• Feed items with the correct side up. When searching for/reading MICR lines,
the scanner will assume the items are being fed face up, with the bottom
edge towards the operator.
• Make sure items are unfolded and place them on the conveyor directly in
front of the point of extraction. This will give the machine a chance to justify
each page dropped against the common edge and will assist in deskewing
the item before it reaches the feeder. For maximum effect, the paper should
be unfolded so that it is flat and makes contact with the conveyor rollers and
feed rings.
• 8-½ x 11” sheets can be scanned in portrait or landscape. The scanner is
outfitted with 12.25” image sensors and can accommodate larger pieces of
paper as well.
• Checks and remits should be dropped in the same orientation as if you were
reading them. Other landscape pages can also be automatically detected if
their page width or height is unique.
• To scan two or more items, such as a page with a sticky note attached, first
press the MFD Override button. This will disable the scanner’s ultrasonic
multifeed detector and allow the “2-page” piece into the system.
Feed Direction
CORRECT