v1.12
Cloudberry Management – PTP Management User Manual
- 5 -
1.1.2 Starting IPSet
The figure above shows the startup screen of IPSet. In order to start the tool you must select
an interface on your computer; until you select an interface the three image buttons on the
bottom are disabled. You may start different sessions on different interfaces, and IPSet will
search for devices on the specified interface. Note that you do not need to be in the same IP
domain in order to find the device during scan, but you need to be in the same IP domain to
configure a device.
There are three options after you have selected an interface:
