v1.12
Cloudberry Management – PTP Management User Manual
- 28 -
Write: “8001, 8002, 8003”, and press the “Add UDP port(s)”
button. The table should be populated with the selected
filters.
As with every other setting, the filter is uploaded to the
device after clicking the “Set” button. Until then, the change
is only local in IPSet. If you have configured wrongly and
want to start from the settings in the device, use the
“Refresh” button to retrieve the settings from the device you
are configuring.
Select ports
The checkbox controls which ports the filter is set for.