v1.12
Cloudberry Management – PTP Management User Manual
- 27 -
Section
Description
Enable
Enable / Disable the UDP filtering function on the specified
port
Allow
Allow only – Only UDP packets matching the filters will be
sent on the port. All other UDP packets will be discarded.
Block
Block all – All UDP Packets matching the configured UDP
filters will be discarded. All other UDP packets are sent
normally.
Filter on
UDP DST – Filter on UDP destination ports only
UDP SRC – Filter on UDP source ports only
UDP SRC/DST – Filter on one destination port and the other
selected source port filters.
UDP DST
If the “Filter on” selection is “UDP SRC/DST” one UDP
destination port may be selected. For setting the filter you
must write to the field directly, and pushing the set button.
Filter 1-N
The configured UDP ports are visible here. The number may
be associated to a destination or source port depending on
the setting in the “Filter on” choice box.
Clear Table
Clear all the Filters. Clearing individual lines in the filter is
also possible by right-clicking on the desired line.
Add UDP Port(s)
For adding UDP ports to the table, please enter one or more
UDP port numbers in the right text field, and press the “Add
UDP port(s). The checkboxes controls which physical switch
ports the filters are set for.
Example:
