v1.12
Cloudberry Management – PTP Management User Manual
- 29 -
1.2.8.2.7
I/O
The I/O section contains configuration related to the input and outputs of the unit. Different
kinds of output signals are selectable on the available outputs. Note that the devices have
different number of available outputs, and the GUI will reflect the version which is under
configuration. Connector pin-out is also included in the I/O tab.
The figure below shows a CM-1600 AERO with the PPS signal and one RS422 serial output.
The CM-1600 RJ45 19 inch version has 8 available outputs in addition to the PPS and the 10
MHz output.
