v1.12
Cloudberry Management – PTP Management User Manual
- 24 -
1.2.8.2.5
Time
Set time statically. Time can be stored to persistent memory (flash) such that the device will
begin to count from the configured time at boot instead of counting from 0. The static UTC
offset may also be set in this menu.
Note that if GPS is enabled the stored time value as well as UTC offset will be overridden. If
GPS is disabled time will also be set on runtime in addition to memory.
Section
Description
Time
Time can be set manually from IPSet via this menu.
-
Device time – PTP
Time (TAI)
This is the devices true time clock. If no time is visible, the
device does not answer the GET TIME dataset.
-
Device time –
(From TAI)
This is the device true time
converted
to local time. This time
is shown for clarity reasons. When setting time it is
convenient to use the computers time which normally will be
in local time zone of the computer location.
-
Set time
When checked, a “Set” will trigger a set time command to the
device. When unchecked, no alterations of time will be made.
If the GPS is enabled at the time of a “Set”, the device time
will be stored to flash and the device will continue to use
GPS time until it is rebooted and the GPS is disabled.
