Omron ZW-C1*AT, Руководство пользователя

Страница: 237 / 450

No-protocol Connection ZW User's Manual
235
6
Commun
ication
s with Exte
rnal De
vi
ces
Command List
This table lists no-protocol communications commands.
The available commands are listed as follows.
Command
name Format Return value
*1
Description Pages
MS MS <Task number>
<Delimiter> <Measured value>
<Delimiter> Acquires the current measured value.
If the <task number> is omitted, the
measured value displayed is acquired.
If "4" is set for the <task number>, the
measured values for all tasks are obtained. p.237
JG JG <Task number>
<Delimiter> <Judgment result>
<Delimiter> Acquires the judgment result of the specified
task.
If the <task number> is omitted, the result of
the task of which the result is currently
displayed is acquired.
If "4" is set for the <task number>, the
judgment results for all tasks are obtained. p.238
DG DG <unit number>
<Data number>
<Delimiter> <Data>
<Delimiter> Acquires the measurement data and setting
data of the processing unit. p.239
DS DS <unit number>
<Data number>
<Measured value> <Delimiter> OK <Delimiter> Change the setting data of the processing
unit. p.240
BG BG <Delimiter> <Bank number>
<Delimiter> Acquire the current bank number. p.241
BS BS <Bank number>
<Delimiter> OK <Delimiter> Replace the current bank number by the
specified bank number. p.242
ZR ZR <Task number>
<Delimiter> OK <Delimiter> Execute a zero reset for the specified task.
If the <task number> is omitted, the zero
reset is executed for the task of which the
result is currently displayed.
If "4" is set for the <task number>, this is
executed for all tasks. p.243
ZC ZC <Task number>
<Delimiter> OK <Delimiter> Cancel the zero reset of the specified task.
If the <task number> is omitted, the zero
reset is executed for the task of which the
result is currently displayed.
If "4" is set for the <task number>, this is
executed for all tasks. p.244
TM TM <0:OFF/ 1:ON>
0<Delimiter> OK <Delimiter> Executes TIMING input.
* Calculates OR with the parallel input. p.245
RT RT <0:OFF/ 1:ON>
0<Delimiter> OK <Delimiter> Executes RESET input.
* Calculates OR with the parallel input. p.245
LD LD <0: Lit/ 1: Out>
0<Delimiter> OK <Delimiter> Turns the logical beam ON/OFF. p.246
VR VR <Delimiter> <Model/Version>
<Delimiter> Acquire the system version information.
(Example) ZW-CE10T 1.100 <Delimiter> p.246
CA CA 0 <Delimiter> OK <Delimiter> Calibrate the Sensor Head. p.247
LS LS <Save intervals>
<Number of saves> <Delimiter> OK <Delimiter> Start the internal logging of the data. p.247
LE LE <Delimiter> OK <Delimiter> End the internal logging of the data. p.248