![background image](http://html1.mh-extra.com/html/omron/z500-series/z500-series_operation-manual_743394077.webp)
75
Z500
Operation Manual
SECTI
ON 4
SECTION 4
Menus for Expert Menu
The selection for measurement item will be displayed.
3.
Select the measurement item.
In this example, Select
Edge position.
The setting screen for edge position will be displayed.
4.
Specify the level to be measured as the
edge.
Move the cursor with the
Left
and
Right
Keys.
(Use these keys together with the
SHIFT
Key to move the cursor quickly.)
The setting screen for edge position will be displayed.
5.
Specify the edge position regarded as
the measurement point.
Move the cursor with the
Up
and
Down
Keys.
CHECK
In some cases, the cursor will not be
displayed on the intersection point of the
edge level and the edge position.
However, selection of an arbitrary cursor
will give the same measurement result
(the intersection point becomes the
measurement point), as long as the
selected cursor exists near the
intersection point.
A confirmation message will be displayed.
6.
Select
Execute
.
The setting will be registered and the screen in (
2.
) will return.
Measrmnt item
Height
Step: 2 pts
Step: 3 pts
Edge position
Width
Edge center
Peak/bottom
Define
Cursor
Measrmnt items will be set.
OK?
Execute
Cancel
Back
St
e
p
2
St
e
p
1
St
e
p
3
St
e
p
4
St
e
p
5
St
e
p
6
St
e
p
7
Содержание Z500 Series
Страница 20: ...18 SECTION 1 1 2 Operational Flow Z500 Operation Manual SECTION 1 Features MEMO ...
Страница 40: ...38 SECTION 2 2 4 Saving Settings and Exiting the Z500 Z500 Operation Manual SECTION 2 Basic Operations MEMO ...
Страница 144: ...142 SECTION 5 5 8 Backing Up Data to a Computer Backup Z500 Operation Manual SECTION 5 Other Functions MEMO ...
Страница 184: ...182 7 3 Analog Output SECTION 7 Z500 Operation Manual SECTION 7 I O Format MEMO ...