![background image](http://html1.mh-extra.com/html/omron/z500-series/z500-series_operation-manual_743394162.webp)
160
7-2 R
S
-232C
SE
CTION 7
Z500
Operation
Manual
SECTION 7
I/O Format
Command Formats
The following commands can be input from the host device to the Z500.
Common commands have abbreviations that are shown in parentheses.
Commands that Obtain or Change Current Settings
Use the following commands to change settings or specify operations while
reading the Z500 settings on the host side.
Commands that Obtain Measurement Results
Commands that Save and Load Data
Other
Command
Function
Page
AVE
Obtains or changes the averaging number.
162
JUDPARA
Obtains or changes the judgment upper limit and judgment
lower limit.
163
SCENE
Obtains the scene number currently displayed.
165
Changes the scene to be measured.
165
SENS
Sets the sensitivity adjustment method to
Auto
and obtains the
optimum sensitivity for the workpiece.
166
Sets the sensitivity adjustment method to
Auto
and changes
the sensitivity level, turns the Laser OFF, and changes adjust-
ments gradation.
166
SENSET
Sets a correction value.
167
Clears a correction value.
167
SENSM
Sets the sensitivity adjustment method to
Multi
and obtains the
optimum sensitivity for the workpiece.
168
Sets the sensitivity adjustment method to
Multi
and changes
the sensitivity level, turns the Laser OFF, and changes adjust-
ments gradation.
168
ZERO
Executes Force-zero.
169
Resets Force-zero.
170
Command
Function
Page
JUDGE (J)
Obtains the most recent judgment result.
171
MEASURE
(M)
Obtains the most recent measurement value.
172
TREND (T)
Obtains the measurement values from the start to the end of the
measurement under the Trigger setting.
173
PROFILE (P)
Obtains the height distribution data (profile data) of 126 points.
175
Command
Function
Page
DATASAVE
Saves all data to flash memory.
176
SCNLOAD
Loads scene data from the host device.
176
SCNSAVE
Saves scene data to a host device.
177
SLANTLOAD
Loads correction values from the host device.
177
SLANTSAVE
Saves correction values to a host device.
178
SYSLOAD
Loads system data from the host device.
178
SYSSAVE
Saves system data to a host device.
179
Command
Function
Page
VERGET
Obtains the system's version information.
179
Содержание Z500 Series
Страница 20: ...18 SECTION 1 1 2 Operational Flow Z500 Operation Manual SECTION 1 Features MEMO ...
Страница 40: ...38 SECTION 2 2 4 Saving Settings and Exiting the Z500 Z500 Operation Manual SECTION 2 Basic Operations MEMO ...
Страница 144: ...142 SECTION 5 5 8 Backing Up Data to a Computer Backup Z500 Operation Manual SECTION 5 Other Functions MEMO ...
Страница 184: ...182 7 3 Analog Output SECTION 7 Z500 Operation Manual SECTION 7 I O Format MEMO ...