![background image](http://html1.mh-extra.com/html/omron/z500-series/z500-series_operation-manual_743394139.webp)
137
Z500
Operation Manual
SECTION 5
5-8 B
acking
Up
Data to a C
o
mp
uter (Back
up)
SECTION 5
Other Functions
2.
Make the Z500 communications settings.
The default communications settings are as shown in the following table. These
settings can normally be used.
REFERENCE
For details on setting communications specifications, refer to page 145.
3.
Start the Hyper Terminal program on the computer and make the following
communications settings.
The same communications settings must be used on both the Z500 and the
modem on the computer.
4.
Once the preparations have been completed on the computer, enter Tools
Mode.
REFERENCE
Refer to page 128.
The selections will be displayed.
5.
Select
Backup
.
The selections will be displayed.
6.
Select
Scene
.
Item
Setting
Baud rate
38400 (bps)
Data length
8 (bit)
Parity bit
None
Stop bits
1 (bit)
Delimiter
CR
Item
Setting
Speed (B)
38400 (bps)
Data bits (D)
8 (bit)
Parity bit
None
Stop bits
1 (bit)
Flow
None*
Xmodem protocol is used.
Test
Surrounding image
Backup
Scn 0 Tools
Scene
System
Sys+scn
Slant data
Содержание Z500 Series
Страница 20: ...18 SECTION 1 1 2 Operational Flow Z500 Operation Manual SECTION 1 Features MEMO ...
Страница 40: ...38 SECTION 2 2 4 Saving Settings and Exiting the Z500 Z500 Operation Manual SECTION 2 Basic Operations MEMO ...
Страница 144: ...142 SECTION 5 5 8 Backing Up Data to a Computer Backup Z500 Operation Manual SECTION 5 Other Functions MEMO ...
Страница 184: ...182 7 3 Analog Output SECTION 7 Z500 Operation Manual SECTION 7 I O Format MEMO ...