Omron NS15-V2 Series, Руководство по установке

Страница: 80 / 334

3-6 Using Memory Cards
3-26
Banks are automatically created under the following conditions.
•
When data is transferred to the Memory Card using the CX-Designer.
•
When data is transferred (uploaded) from the PT.
Reference
•
When transferring data, only one bank can be specified. Set only one of pins 1 to 4 to
ON.
•
The PT will operate normally when the DIP switch is set to a combination other than
one specifying automatic upload, download, or manual transfer.
•
When data has already been stored in the banks of the Memory Card and uploading is
executed, the previous data in the specified bank will be deleted. Always check the
data stored in the banks before uploading.
•
If the \BANK @ \DATA and \BANK @ \SYSTEM are created manually in the Memory Card,
and used for purposes other than transferring data, when uploading is performed, the
data in the folders will be deleted, and the data in the PT will be copied to the folders.
Therefore, do not use \BANK
@ \DATA or \BANK @ \SYSTEM when creating folders in
the Memory Card.
•
Set all pins to OFF when using the PT for normal operations.
Precautions
for Safe Use
Use the following technique when changing DIP-switch settings.
Correct technique
Incorrect technique
Back of the PT’s case
DIP switch
The DIP switch may bend or break if the tool is incorrectly levered against the
PT’s case as shown in the diagram.
z
Automatic Download
An automatic download transfers system programs and screen data from the Memory Card
to the PT.
Set the DIP switch for automatic download, as shown below.
The Memory Card cannot be used to transfer data when the DIP switch pins are set to com-
binations other than those specified here.
DIP switch pin and status
1 2 3 4 5 6
Operation
ON
OFF OFF OFF OFF OFF
Automatically downloads bank 1 system
programs and screen data.
ON
OFF OFF OFF OFF OFF
Automatically downloads bank 2 system
programs and screen data.
ON
OFF OFF OFF OFF OFF
Automatically downloads bank 3 system
programs and screen data.
ON
OFF OFF OFF OFF OFF
Automatically downloads bank 4 system
programs and screen data.