Omron NS15-V2 Series, Руководство по установке

Страница: 179 / 334

6-1 Operating Modes and System Menu
6-5
Item Function Page
Alarm Monitor Registration
Method Specifies the method for performing monitor registration of alarms
and events. P. 6-30
Starting Ladder Monitor
from Alarm/Event Sum-
mary and History
(NS15/NS12/10/8 only) Specifies whether to start the ladder monitor when an alarm/event
summary or history record is pressed. P. 6-30
Tag Update Notification
Message Setting Specifies whether to display a confirmation message before start-
ing tag verification when tags are verified while the NS-series PT is
operating. P. 6-31
Time to Switch to System
Menu (NS12, NS10, NS8,
or NS5) Sets the time required to switch to the System Menu when two of
the four screen corners are pressed. The time to switch to the Sys-
tem Menu can be set to between 0 and 5 s. P. 6-31
Double-touch interval
(NS15 only) With the NS15, one corner of the screen must be touched twice in
a row to move to the System Menu. The interval between the
touches can be set. P. 6-32
Analog RGB Output
(NS15 only) Sets whether to use the analog RGB output. The default setting is
Disable .
P. 6-32
3. Project Tab
Item Function Page
Project Title Displays the project title. P. 6-33
Number of Labels Displays the number of corresponding labels. P. 6-34
Initial Screen Sets and displays the screen numbers first displayed after the
power is turned ON. P. 6-34
Initial Label Sets and displays the label number shown on the screen after the
power is turned ON. P. 6-34
Alarm/Event Recording
Method Displays the method for recording the alarm/event histories. P. 6-34
Data Log Recording
Method Displays the method for recording the data log. P. 6-34
Operation Log Recording
Method Displays the method for recording the operation log. P. 6-35
Error Log Recording
Method Displays the method for recording the error log. P. 6-35
System Memory ($SB) Displays the allocated addresses of the system bit memory ($SB). P. 6-35
System Memory ($SW) Displays the allocated address of the system word memory ($SW). P. 6-35
4. Password Tab
Item Function Page
Level 1 Changes the level 1 password. P. 6-36
Level 2 Changes the level 2 password. P. 6-36
Level 3 Changes the level 3 password. P. 6-36
Level 4 Changes the level 4 password. P. 6-36
Level 5 Changes the level 5 password. P. 6-36
Password mode Selects the password function (including passwords with levels). P. 6-37
Time Out Specifies whether user authentication is automatically canceled
after a set time has elapsed. P. 6-38
Timeout (min) Sets the timeout time. P. 6-38
Switch Screen when
canceling the authentica-
tion Specifies whether the screen is switched automatically when au-
thentication is canceled. P. 6-38
Switch Screen No. Sets the screen number that is displayed at when authentication
is canceled. P. 6-38