Omega DP41-B Series, Руководство пользователя

Страница: 58 / 132

12
Input Type Selection
48
12.5 INPUT TYPE: (BRIDGE)
ENTER INPUT TYPE MENU:
Press ‘ MENU ’ 1) Display shows " INPUt " Input Menu.
Press ‘ RESET/ENTER ’ 2) Display flashes " VOLt " (default) or previous stored input type.
Press ‘
䊱
/MAX ’ 3) Scroll through the available following input type selection list. Display
flashes:
" VOLt " (DC Voltage)
" CURRNt " (DC Current)
" bRIdGE " (Bridge)
" POt " (Potentiometer)
" tC " (Thermocouple)
" Rtd " (RTD)
If the displayed input type is " bRIdGE " , press ‘ RESET/ENTER ’ to skip to
Step 6 ( " bRIdGE " stops flashing).
bRIdGE "bRIdGE" SUBMENU:
Press ‘
䊱
/MAX ’ 4) Scroll through the available selection to " bRIdGE " (flashing).
Press ‘ RESET/ENTER ’ 5) Display shows " bRIdGE " again, but not flashing.
Press ‘ RESET/ENTER ’ 6) Display shows " StOREd " stored message momentarily and then
advances to the " RdG.CNF " Reading Configuration Menu.
To ensure the input range is properly polarized as desired for
configuration, the user must select " UN IPOL " input (default) or " bI POL "
bipolar accordingly in the input VOLt DC VOLTAGE SUBMENU with the
same voltage range before selecting "BRIdGE" or "POt" Potentiometer
input type.