Omega DP41-B Series, Руководство пользователя

Страница: 66 / 132

14
Reading Configuration Menu
56
14.4 FILtER Enter FILTER CONFIGURATION SUBMENU:
Press ‘ RESET/ENTER ’ 12) Display shows "CNt by" Counter by or round-off feature. To enter,
Press ‘ RESET/ENTER ’).
Press ‘ MENU ’ 13) Scroll through 3 available selections of Filter configuration: " CNt by " ,
" FILt.tP " and " FILt.tM " . Refer to the flowchart below.
CNt by Enter COUNT BY FILTER FUNCTION MENU:
Press ‘ RESET/ENTER ’ 14) Display flashes "001" (default) or previous setting value.
Press ‘
䊱
/MAX ’ 15) Scroll though 7 available selections: 001 , 002 , 005 , 010 , 020 , 050 and
100 for your choice of setting.
Press ‘ RESET/ENTER ’ 16) Display advances to " FILt.tP " Filter Type Selection Menu. If a change
was made, the controller will also show " StOREd " stored message
momentarily.
FILt.tP Enter FILTER TYPE SELECTION MENU:
Press ‘ RESET/ENTER ’ 17) Display flashes " A.b.C.F IL " A daptive B andwidth C ontrol F ilter.
Press ‘
䊱
/MAX ’ 18) Scroll through 2 supported types: " A.b.C.F IL " or " MOV.AVE " (Moving
Average) for your desired option.
Press ‘ RESET/ENTER ’ 19) Display advances to " FILt.tM " Filter Type Selection Menu. If a change
was made, the controller will also show the " StOREd " stored message
momentarily.
FILt.Tm Enter FILTER TIME SETTING MENU:
Press ‘ RESET/ENTER ’ 20) Display flashes " 004 " (default) or previous setting value.
Press ‘
䊱
/MAX ’ 21) Scroll though 8 available selections: 001 , 002 , 004 , 008 , 016 , 032 ,
068 and 128 for your choice of setting.
Press ‘ RESET/ENTER ’ 22) Display advances to " FLS.dSP " Flashing Display Setting Menu. If a
change was made, the controller will also show the " StOREd " stored
message momentarily.