Omega DP41-B Series, Руководство пользователя

Страница: 72 / 132

16
Input Configuration Menu
62
In case of " bRIdGE " input type:
Press ‘ RESET/ENTER ’ 19) Display shows " bRdG.LM " Bridge Limit function menu.
Press ‘ RESET/ENTER ’ 20) Display flashes " NORMAL " or the previous setting.
Press ‘
䊱
/MAX ’ 21) Scroll the available options of setting: " NORMAL " or " SP1.L.2.H "
(Setpoint 1 value would be lower overload limit and Setpoint 2 would be
upper overload limit) for your choice of setting.
Press ‘ RESET/ENTER ’ 22) Display advances to " RAt IO " Ratiometric input reading or
measurement setup menu. If a change was made, the controller will also
show " StOREd " stored message momentarily.
Press ‘ RESET/ENTER ’ 23) Display flashes " dISAbL " or previous setup option.
Press ‘
䊱
/MAX ’ 24) To select either " ENAbLE " or " dISAbL " for your choice of setup.
Press ‘ RESET/ENTER ’ 25) Display advances to " IN.SC.OF " Input Scale & Offset Configuration
Submenu or measurement setup menu. If a change was made, the
controller will also show the " StOREd " stored message momentarily.
16.4 IN.SC.OF Enter INPUT SCALE & OFFSET CONFIGURATION SUBMENU:
Press ‘ RESET/ENTER ’ 26) Display flashes " dISAbL " (default) or previous selection.
Press ‘
䊱
/MAX ’ 27) To select either " ENAbLE " or " dISAbL " for your choice of setup.
Press ‘ RESET/ENTER ’ 28) Select " ENAbLE " , display flashes " ON.LINE " (default) or previous
selection.
Press ‘
䊱
/MAX ’ 29) To select either " ON.LINE " or " MANUAL " for your choice of Input
Scale & Offset Configuration.
ENAbLE
INPUt 1
(Input 1 value)
REAd 1
(Read1 value)
ON.LINE
INPUt 1
(Input 1 value)
REAd 1
(Read1 value)
MANUAL
IN.SC.OF
(Input Scale & Offset)
INPUt 2
(Input 2 value)
REAd 2
(Read 2 value)
INPUt 2
(Input 2 value)
REAd 2
(Read 2 value)
dISAbL
Offset=0
Scale=1