Omega DP41-B Series, Руководство пользователя

Страница: 55 / 132

45
Input Type Selection
12
12.2 INPUT TYPE: ( RTD )
ENTER INPUT TYPE MENU:
Press ‘ MENU ’ 1) Display shows " INPUt " Input Menu.
Press ‘ RESET/ENTER ’ 2) Display flashes " VOLt " (default) or previous stored input type.
Press ‘
䊱
/MAX ’ 3) Scroll through the available following input type selection list. Display
flashes:
" VOLt " (DC Voltage)
" CURRNt " (DC Current)
" bRIdGE " (Bridge)
" POt " (Potentiometer)
" tC " (Thermocouple)
" Rtd " (RTD)
If the displayed input type is " Rtd " , press ‘ RESET/ENTER ’ to skip to Step 6
( " Rtd " stops flashing).
Rtd "Rtd" RTD SUBMENU:
Press ‘
䊱
/MAX ’ 4) Scroll through the available selection to " Rtd " (flashing).
Press ‘ RESET/ENTER ’ 5) Display shows " StOREd " stored message momentarily and then " Rtd "
(not flashing).
Press ‘ RESET/ENTER ’ 6) Display flashes previous RTD type selection. ie. " 4Pt 385 " default
(see Table below for types). If the display matches your choice of RTD
type. Go to Step 8
Press ‘
䊱
/MAX ’ 7) Scroll through the available RTD types to the selection of our choice.
Press ‘ RESET/ENTER ’ 8) Display shows " StOREd " stored message momentarily and then
advances to the " RdG.CNF " Reading Configuration Menu.
Display RTD types
2Pt 392 2 wire, 100 Ohms, NIST RTD, alpha=0.00392
3Pt 392 3 wire, 100 Ohms, NIST RTD, alpha=0.00392
4Pt 392 4 wire, 100 Ohms, NIST RTD, alpha=0.00392
2Pt 385 2 wire, 100 Ohms, NIST RTD, alpha=0.00385
3Pt 385 3 wire, 100 Ohms, NIST RTD, alpha=0.00385
4Pt 385 4 wire, 100 Ohms, NIST RTD, alpha=0.00385
3.L INR 3 wire, linear RTD
4.L INR 4 wire, linear RTD