Omega DP41-B Series, Руководство пользователя

Страница: 51 / 132

41
Setpoint Settings Menu
9
9 ACTIVE BUTTONS: ‘SETPTS’, ‘
䊱
/MAX’, ‘
䊳
/MIN’.
Press ‘ SETPTS ’ 1) The display shows "SP1" momentarily then "00000.0" or previous
setpoint value with first digit flashing. If any digit or value is not flashing that
setpoint value‘s modification, the ‘ MAX ’ and ‘ MIN ’ buttons are disabled or
locked.
(Refer to LCk.CNF Menu Configuration to unlock the setpoint for regaining
access of those buttons).
Press ‘
䊱
/MAX ’ 2) If it is necessary to modify a setpoint other than SP1, the display will
automatically show each of the next setpoints in about 10 seconds; then
select the desired one by ‘ MAX ’ button. Otherwise the instrument will
return to RUN mode after SP 4’s value displayed.
Press ‘ SETPTS ’ 3) To scroll through available setpoints and return to RUN mode in the
following sequence:
" SP 1 " , "Setpoint1’s value"
" SP 2 " , "SP2’s value"
" SP 3 " , "SP3’s value"
" SP 4 " , "SP4’s value"
" RUN " .
Press ‘
䊱
/MAX ’ 4) Enables the user to select and modify first, or flashing digit of the
setpoint value.
Press ‘
䊱
/MAX ’ 5) The digit will change in this following cycle: 0 to 9, - (minus sign).
Press ‘
䊱
/MIN ’ 6) To select the next downward digit to modify.
Press ‘ SETPTS ’ 7) Display shows " StOREd " stored message momentarily (to save the
new value if a change was made) then advances to next item " SP2 "
Setpoint 2.
Press ‘ SETPTS ’ 8) Continue pressing ‘ SETPTS ’ to access next setpoint and return to
RUN Mode.
The display Menu will advance to the next setpoints menu item about
10 seconds at any step within this menu and the new value of setpoint
will be stored automatically if a change was made.
For more Setpoint Configuration and applications, refer to
Section 21 .