Omega DP41-B Series, Руководство пользователя

Страница: 105 / 132

95
Communication Menu Configuration
26
26.5 AddRES Enter ADDRESS SELECTION SUBMENU
Press ‘ RESET/ENTER ’ 60) Display shows " StOREd " stored message momentarily and then
advances to the " AddRES ” Address selection submenu.
• This menu is applicable to the RS-485 Option only to designate different
address for each device or controller in the Multi-point Serial
Communication network that allows hosting device to recognize and
communicate properly as labeling or naming purposes.
Press ‘ RESET/ENTER ’ 61) Display flashes " 001 " Address Value 1 as default.
Press ‘
䊱
/MAX ’ & ‘
䊳
/MIN ’ 62) To modify and select Address Value for your choice of setting. This
controller supports value within 000 – 199.
26.6. SERCNt Enter SERIAL COUNT SUBMENU
Press ‘ RESET/ENTER ’ 63) Display shows " StOREd " stored message momentarily and then
advances to the " SERCNt " Serial Count submenu.
• Serial Count menu is used to program the number of readings the meter
just take (programmable from " 00001 " to " 59999 " ) between
transmissions of data via the Serial Communication Option Board.
Caution: For proper communication, do not set Serial Count Value at
"00000" .
Press ‘ RESET/ENTER ’ 64) Display flashes " 00001 " as default Serial Count value.
Press ‘
䊱
/MAX ’ & ‘
䊳
/MIN ’ 65) To modify and select the desired value of Serial Count (number of
readings) between data transmissions.
Press ‘ RESET/ENTER ’ 66) Display shows " StOREd " stored message momentarily and then
advances to the " COLOR " LED Color Select submenu.