Omega DP41-B Series, Руководство пользователя

Страница: 73 / 132

63
Input Configuration Menu
16
ON.L INE
Press ‘ RESET/ENTER ’ 30) Display flashes " ON.L INE " On line method.
Press ‘
䊱
/MAX ’ 31) Scroll between 2 available selections: " ON.L INE " or " MANUAL " for
the configuration option of your choice. If your choice of selection is
" MANUAL " , skip to Step 40).
Press ‘ RESET/ENTER ’ 32) Display stops flashing and shows "ON.L INE".
Press ‘ RESET/ENTER ’ 33) Display shows " INPUt 1 " Item #1 of coordinate #1.
Pressing ‘ RESET/ENTER ’ to sequence through
" INPUt 1 " , Input 1 ’s value
" REAd 1 " , Read 1 ’s value
" INPUt 2 " , Input 2 ’s value
" REAd 2 " , Read 2 ’s value
headings for the desired selection to enter new value.
Press ‘ RESET/ENTER ’ 34) Display shows " xxxxxx " some 6-digit number, represents the value of
" INPUt 1 " as taken from live input source measurement for desired value.
Press ‘ RESET/ENTER ’ 35) Display shows " REAd 1 " Item #2 of coordinate #1.
Press ‘ RESET/ENTER ’ 36) Display shows " xxxxxx " some 6-digit number with first digit flashing,
represents the value of " REAd 1 " item #2 of coordinate #1.
Press ‘
䊱
/MAX ’ & ‘
䊳
/MIN ’ 37) Use ‘ MAX ’ and ‘ MIN ’ buttons to enter new value of "REAd 1" .
Press ‘ RESET/ENTER ’ 38) Display shows " INPUt 2 " Item #1 of coordinate #2. Continue to
proceed with the selection and value entry for "INPUt 1" and "REAd 1"
for " INPUt 2 " and " REAd 2 " , (item #1 and #2 of coordinate #2) similar to
steps above.
Press ‘ RESET/ENTER ’ 39) Display advances to " MP.SC.OF " Multi-Scale & Offset configuration
menu. If " REAd 2 " item #2 of coordinate #2 was prompted or modified, the
controller will also show " StOREd " stored message momentarily.
MANUAL
Press ‘ RESET/ENTER ’ 40) " MANUAL " heading stops flashing.
Press ‘ RESET/ENTER ’ 41) Display shows " INPUt 1 " Item #1 of coordinate #1.
Pressing ‘ RESET/ENTER ’ to sequence through
" INPUt 1 " , Input 1 ’s value
" REAd 1 " , Read 1 ’s value
" INPUt 2 " , Input 2 ’s value
" REAd 2 " , Read 2 ’s value
headings for the desired selection and continue using ‘ MAX ’ and ‘ MIN ’
buttons to manually enter or modify the values as described the below
section.
Press ‘ RESET/ENTER ’ 42) Display shows " xxxxxx " some 6-digit number with first digit flashing,
represents the value of " INPUt 1 " item #1 of coordinate #1.
Press ‘
䊱
/MAX ’ & ‘
䊳
/MIN ’ 43) Use ‘ MAX ’ and ‘ MIN ’ buttons to enter new value of " INPUt 1 " item #1
of coordinate #1.
Press ‘ RESET/ENTER ’ 44) Display shows " REAd 1 " . Continue with the sequential items and use
‘ MAX ’ & ‘ MIN ’ buttons to select and enter values.
Press ‘ RESET/ENTER ’ 45) Display advances to " MP.SC.OF " Multi-point Scale & Offset
Configuration Menu. If " REAd 2 " item #2 of coordinate #2 was prompted
or modified, the controller will also shows " StOREd " stored message
momentarily.