Olympus AL120-12 Series, Руководство по обслуживанию, Страница: 60 / 68

Maintenance Manual Replacement of Consumables
4-1
Page
4 Replacement of Consumables
Consult your nearest OLYMPUS distributor for the inquiry about consumables.
Please give the distributor the product name and serial No.
The tools and accessories required are indicated with Tools and Accessories in this text. Tools are not
included with this product.
Replacement cycles are indicated with
Replacement Cycle .
The standard time required for replacement work is indicated with Standard Working Time .
Be sure to turn the main switch OFF and unplug the power cord before replacing
consumables.
Use the right tool for the right accessory when assembling this product. If the tools
are not used properly or this manual is not followed during assembly, parts may be
damaged and product safety cannot be guaranteed.
If any noise occurs in the operation of a part, please contact your OLYMPUS
distributor.
This loader uses specialized clean grease. Improper greasing may cause a
malfunction.
1 Macro (Center) Table: If a vacuum error has occurred or the table has become damaged
Tools
Phillips-head screwdriver (No. 0)
Accessories
M2 cross recessed pan head machine screws
1) Remove the three M2 cross recessed pan head machine screws
①
and replace the macro (center) table.
Standard Working Time 10 minutes

ＣＡＵＴＩＯＮ
ＣＡＵＴＩＯＮ