Olympus AL120-12 Series, Руководство по обслуживанию, Страница: 36 / 68

Test Programs Maintenance Manual
3-8
Page
Test No./
Test Name
Function Outline
•
Press the [Start] button to pause the operation at the break point.
• The speed can be changed during the pause.
•
When an error occurs, the loader displays the same error code as in the regular operation, and then
stops.
•
Press the [Quit] button, and the A-arm returns to its initial position and the loader stops the operation.
No. 3
A-arm
horizontal
movement
check
<A-arm horizontal movement check>
This program can be used to check the A-arm horizontal movement.
Select the operation speed using the menu buttons on the liquid crystal panel.
[M1] : High speed <Fast speed> [M2] : Medium speed <Middle speed> [M3] : Low speed <Slow
speed>
• If you do not specify anything here, the loader will operate at the high speed [M1]: High speed
<Fast speed> setting.
Press the [Start] button.
If the loader has not been initialized, initialization starts.
①
Press the interlock switch and the [Start] button.
②
FOUP Door open. (AL120-LMB12-LP3 only.)
③
When the door opens completely, release your hand from the interlock switch, and press the [Start]
button. (
①
to
③
are for AL120-LMB12-LP3 only.
）
④
Moves to upper limit height.
⑤
Center of Macro table → Cassette side
⑥
Cassette side → Center of Macro table
⑦
Center of Macro table → Standby position
⑧
Standby position → Cassette side
⑨
Cassette side → Standby position
⑩
Standby position → Center of Macro table
The loader then repeats steps
⑤
to
⑩
.
• The operation will not start if a cassette is set on the elevator.
•
Press the [Start] button to pause the operation at the break point.
• The speed can be changed during the pause.
•
When an error occurs, the loader displays the same error code as in the regular operation, and then
stops.
• Press the [Quit] button, the A-arm returns to its initial position. Then, if you press the [Start] button or
the [Quit] button while pressing the interlock switch of the FOUP opener, the FOUP door closes and
the loader stops the operation.
A-arm moves horizontally to the cassette installation part at high
speed.
When the FOUP Door opening and shutting part is carelessly looked
into, it is likely to injure in A-arm that moves.
Do not continue the operation for longer than 5 minutes.
Wait for longer than one minute before restarting the operation.
ＣＡＵＴＩＯＮ