87
Introduction
For your basic operation
Maintenance
When encountering a problem
Appendix
6
Knob
Discharge
Press the knob at the near side of the case
containing the spittoon absorber liquid to
open the lid, raise the front side of the spittoon
absorber liquid case to discharge the spittoon
absorber liquid to the backside.
The discharged spittoon absorber liquid will go into
the waste ink bottle.
When discharge is completed, put the spittoon
absorber liquid case back into the original position.
7
Spittoon case
Hold the fi nger grip at the spittoon case’s both
side.
Then remove the spittoon case by lifting
upward.
8
Set a new spittoon case’s locating hole to the
protrusion, and fi x it horizontally by pressing
slightly.
9
Spittoon case
Dropper
Moisten the spittoon case with the spittoon
absorber liquid using a dropper.
10
Spittoon unit
Liquid level
Top of the
protrusions
Confi rm that the spittoon absorber liquid’s top
surface is as high as the top of the protrusions.
CAUTION
- In the spittoon case, the spittoon absorber liquid is
absorbed by the sponge, which may lower the liquid’s
top surface.
In such a case apply the liquid additionally.
11
Close the capping cover and then close the front cover.
The carriage returns automatically to the home position.
Содержание CS6410
Страница 98: ......
