Oce CS6410, Основное руководство по эксплуатации

Страница: 70 / 98

Océ CS6410 Basic Operation Guide
70
Before deciding that there is a serious problem with the Printer, check the following items.
Power is not turned on.
Items to be checked Corrective measures
z
Power cable connection Check that the power cable is correctly plugged into the power outlet.
z
Power supply to the outlet Supply power to the power outlet.
z
Power switch on/off Turn on the power switch. See “Turn the Printer on.” on page 29.
The paper guide is not heated even when the heater is turned ON.
Items to be checked Corrective measures
z
Printer status The paper guide is heated during
Printing or when the heater is turned on with the heater control menu. Be sure the
paper guide is heated by printing the nozzle print pattern or set the heater to ON.
See the Advanced Operation Guide.
z
Host computer RIP setting The heater temperature can be set also by the RIP of the host computer. Check the
host computer setting.
z
Heater control menu Turn on the heater (afterheater/printheater/preheater) again, and then print nozzle
print pattern or forcibly set the heater to ON to check that the paper guide is heated.
See the Advanced Operation Guide.
z
Power voltage Connect the Printer to 200 VAC power.
The printer fails to start or operate correctly.
Items to be checked Corrective measures
z
ERROR LED and LCD message
on the operation panel See “When an error message is displayed” on page 74.
The Printer cannot print.
Items to be checked Corrective measures
z
USB cable connection Connect the USB cable correctly. See “To connect USB cable.” on page 28.
z
ERROR LED and LCD message
on the operation panel. See “When an error message is displayed” on page 74.
z
Error LED OFF Print the nozzle adjustment pattern. See “Print the nozzle print pattern” on page 67.
(Confi rm that the RIP software "Test pattern" is printed.)
z
Print head cleaning Clean the print head. See “Performing normal cleaning” on page 66.
Check your problem
When encountering a problem