Oce CS6410, Основное руководство по эксплуатации

Страница: 40 / 98

Océ CS6410 Basic Operation Guide
40
9
Take-up direction switch
OFF
u
Outer take-up
- OFF
v
Inner take-up
Again set the take-up direction switch to OFF.
10
By pressing the key, feed the media until
the front media edge is wound on the paper
tube.
F E E D I N G M E D I A
Be sure to create a suffi cient slack so that the tension
bar is placed at the bottom of the tension bar guide.
11
Open the tension bar guide’s cover.
12
Place the tension bar at the bottom of the
tension bar guide.
When the tension bar does not reach the
tension bar guide’s bottom
- When the tension bar does not reach the
tension bar guide’s bottom, feed the media
with the operation panel’s FEED menu. Confi rm
that tension bar was placed securely at the
tension bar guide’s bottom.
13
Close the tension bar guide’s cover.
When the excessive media slack is created
- If the media slack is secured excessively, the
take-up reel unit may keep winding the media
for more than the prescribed time, and a take-
up timeout error occurs. In such a case, turn off
the take-up direction switch, and then press the
switch again.
14
Input the data in the RIP software.