41
Introduction
For your basic operation
Maintenance
When encountering a problem
Appendix
Procedure to remove media roll from the Printer
Media at take-up side
1
Take-up direction switch
OFF
OFF
Turn off the take-up direction switch.
2
Open the tension bar guide’s cover.
3
Place the take-up side tension bar at the
tension bar hook.
4
Cutter groove
Open the front cover, and then cut the media.
You are recommended to cut the media by setting the
cutter blade along the cutter groove.
Platen
Cutter
Cutter groove
Sponge
Cutter guide
C
C
C
C
C
C
C
C
C
C
Media
CAUTION
- A net is spread out on the supply side and take-up side paper guides respectively, so that the media will not adhere to
the guides. Do not remove these nets.
- When cutting the media, be careful not to damage the paper guide net.
- Pay attention not to drop the printed media to avoid smearing the media.
Содержание CS6410
Страница 98: ......
