Oce CS6410, Основное руководство по эксплуатации

Страница: 48 / 98

Océ CS6410 Basic Operation Guide
48
To take up media in LOOSE winding mode
To prevent media winding deviation, set the paper tube fl ange to the scroller. Note that the rubber spacers are
required depending on the paper tube length as explained below.
Rubber spacer C
(1 pc)
Rubber spacer A
(1 pc)
Rubber spacer B
(1 pc)
Paper tube fl ange (2 pcs)
Paper tube, longer than the media width
Attach the paper tube flange to the
paper tube.
Set the paper tube flange
to rubber spacer A. Set the paper tube flange
to rubber spacer C.
Paper tube flange
Rubber
spacer A
Rubber
spacer B
Rubber
spacer C
Paper tube flange
Rubber
spacer A
Rubber
spacer B
Rubber
spacer C
Paper tube, at length conforming with the media width
メディア
Media
Media
Paper tube
Rubber spacer A Rubber spacer C
Paper tube
Paper tube
Rubber spacer A Rubber spacer B
When the paper tube's inner
diameter is not sufficiently longer
than the flange spacer's diameter, the
flange spacer cannot be pushed all
the way in the paper tube, and the
gap may be found between the
rubber spacer A and the paper tube
edge. In such a case, to clear the gap
set the rubber spacer B between the
rubber spacer A and the paper tube.
Rubber spacer Bʼs application