Component
Function
5) Printer Status
Beacon
Indicates printer status. See Chapter 3 for details.
6) UV Lamps
UV light is used to cure the ink.
7) Vacuum Gauge
Displays the strength of the table vacuum system.
If it reads less than 10"Hg, check for vacuum leaks.
8) Print Button
Starts the current print job.
9) Maintenance Sta-
tion
Designated area for cleaning the printheads and
the underside of the carriage.
10) Vacuum Zone
Control Handles
Five vacuum zone control handles determine if
vacuum zones 2 to 6 on the printer table are active
when the vacuum pump is switched on. Zone 1 is
always on so it has no control handle. The zones
on the Océ Arizona 400 Series XT model are differ-
ent (see Chapter 6 for details).
11) Ink Bay
There are two ink bays: the Primary bay contains
CMYK ink and the coolant bottle; the Secondary
bay holds the additional Cyan or Magenta, and
White ink or Varnish.
12) Ink Filters
Ink filters are behind a door under the ink bags.
The filters remove unwanted particulate matter
from the ink.
(13) Coolant Bottle
Provides coolant to maintain correct temperature
of the ink in the printheads.
(14) Vacuum Table
Foot Switch
Toggles the pump to turn the table vacuum on/off.
Vacuum must be on prior to starting a print.
(15) Bulkhead ac-
cess door
Provides access to the connections required to
plug in the podium components such as LCD mon-
itor, mouse, and E-stop. Also is a storage location
for the coolant supply bottle.
Operator Interface Hardware
Chapter 4 - How to Navigate the User Interface
43
User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013