Safety Awareness
Introduction
This section contains two sets of principles that must be followed to assure
maximum safety when operating your Océ Arizona printer. The first set
uses negative examples to show you things to avoid in order to prevent
injury to the operator. The second set of principles illustrates some of the
residual risks that are inherent in the operation of the printer. These are
situations or physical aspects of the printer that may present a potential
danger to the operator, but would compromise the capabilities of the
printer if changed. Therefore, they are pointed out as a precaution the
operator must be aware of when using the printer.
IMPORTANT
The photos in the following table illustrate situations that must be
avoided when operating your printer.
Situations and Actions to Avoid
How NOT to use the printer
Avoid these Situations For Your Personal Safety
[12] Keep the table clear
Do not place your
hand in the car-
riage pathway
when printer pow-
er is on. Do not
leave any objects
on the table print-
ing surface, except
for media that you
will print on. Also
make sure the me-
dia is 48 mm (1.89
inches) or less in
thickness.
4
Safety Awareness
28
Chapter 3 - Safety Information
User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013
