How to Set Up a Roll Media Job
Introduction
Print jobs can be specified as either a roll job or a flatbed job in the ONYX
workflow software. The job type can be changed after the print job is
transferred to the printer.
Purpose
The operator can choose the type of desired print job and also put a hold
on it so it will not print automatically.
Set up the Roll Job Option
When you set the page size for your print job, click on Type: Roll to make it
a roll media option job.
[71] ONYX Page Size - Roll Option
Set a Hold on a Roll Job
Procedure
1.
To ensure that your roll media print job is held and not automatically
printed, click on the box in front of "Hold for printer operator" when you
set the print options while creating an RMO media in the ONYX workflow
software
How to Set Up a Roll Media Job
134
Chapter 7 - How to Operate the Roll Media Option
User Manual: Arizona (AZ) 440 GT, AZ 440 XT, AZ 460 GT, AZ 460 XT, AZ 480 GT, AZ 480 XT - Rev. B, 4/2013
