Océ CS9360, Руководство по эксплуатации

Страница: 73 / 134

CS9350 OPERATION MANUAL
4-73
b. Press [Enter].

“Init.: 250.0/250 mm” is displayed.
c. Press [+] or [-] and enter the measured value in step 3.
d. Press [Enter].

The initial adjustment value is saved.

“PF2: Initial Change” is displayed.
Step 5:
Performs Confirm Print.
a. Press [+] or [–] to select “PF3: Confirm Print”.
b. Press [Enter].

“Feed Length: 250 mm” is displayed.
TIP

The length of media that is fed (feeding length) for Confirm Print is normally set at 250
mm.

If you increase the feeding length, the accuracy of the Media feed compensation
improves.
To change the feeding length, press [+] or [-] and change the set value.
c. Press [Enter].

“Printing” is displayed.

Starts Confirm Print.

When the Confirm Print is complete, the printer enters Normal.
d. After the Confirm Print, the media is cut.
4.4.3 Cutting media
N° Name
1 Feed length
2 Media feeding direction
2
1 1