Océ CS9360, Руководство по эксплуатации

Страница: 123 / 134

CS9350 OPERATION MANUAL
6-123
6.2.5 Cleaning around the print head
(1) Time for cleaning
When foreign substances such as dust or ink clump that can cause missing dots or ink leakage is attached
around the print head
(2) Cleaning procedures
NOTE

Before cleaning around the print head, read this procedure thoroughly to fully understand
it, and clean promptly and correctly.

While cleaning around the print head, the print head cap is removed, therefore cleaning
must be done before the print head dries. This operation should be done within 15
minutes. If the operation lasts over 15 minutes, follow the Steps 8 and 9 to stop the
operation and perform head cleaning, then resume cleaning.
6.2.3 Head cleaning

Use the cleaning stick to clean around the print head.
For details of the cleaning stick, refer to “8.3 Options/Supply list”.
Step 1:
If the printer is switched ON, make sure the following.

Printing or other operations are not in progress.

The operation panel display is Normal.
Step 2:
Display the CR Maintenance menu.
a. Press [Menu].

“Menu1: Setup>” is displayed.

The operation panel shifts to the Setup menu display.