Océ CS9360, Руководство по эксплуатации

Страница: 72 / 134

CS9350 OPERATION MANUAL
4-72
f. Press [+] or [–] to select “**>3: PF Adjust>”.
g. Press [>].

“PF1: Initial Print” is displayed.

Proceed to Dist.Adj menu.
5.1.1.1.4 Dist.Adj menu
Step 2: Performs Initial Print.
a. Press [Enter].

“Feed Length: 250 mm” is displayed.
TIP

The length of media that is fed (feeding length) for Initial Print is normally set at 250 mm.

If you increase the feeding length, the accuracy of the Media feed compensation
improves.
To change the feeding length, press [+] or [-] and change the set value.
b. Press [Enter].

“Printing” is displayed.

Starts Initial Print.

When the Initial Print is complete, the printer enters Normal.
c. After the Initial Print, the media is cut.
4.4.3 Cutting media
Step 3: Measure the distance between the two pluses in the Initial Print using a ruler.
Step 4:
Sets up Initial Adjust Change.
a. Press [+] or [–] to select “PF2: Initial Change”.
N° Name
1 Feed length
2 Media feeding direction
2
1 1