manualshive.com logo in svg

NXP Semiconductors MPC5644A, Справочное руководство, Страница: 865 / 1735

Поделиться
Скачать
NXP Semiconductors MPC5644A Скачать руководство пользователя страница 865

Enhanced Time Processing Unit (eTPU2)

MPC5644A Microcontroller Reference Manual, Rev. 6

Freescale Semiconductor

865

 

24.5.5.4.2

Channel modes overview

Predefined channel modes are divided according to the way they treat transitions in two basic modes:

•

Single Transition Modes

 (mnemonic suffix 

_st

): In these modes the first transition (flagged in 

TDLA) issues a service request, and captures both time bases (selected by TBSA[1] and TBSB[1]) 
except on sm_st_e. The second transition (flagged in TDLB) does not issue a service request, but 
it captures time base selected by TBSB[1], except on sm_st_e.

•

Double Transition Modes

 (mnemonic suffix 

_dt

): In these modes the second transition (flagged 

in TDLB) issues a service request, and each transition captures its own selected time base 
(Transition A and Transition B capture time bases selected by TBSA[1] and TBSB[1], 
respectively).

In predefined modes, Transition B is always (but not only) enabled by Transition A, so that transitions are 
always ordered: TDLA is set on the first transition and TDLB on the second. Unordered transitions are 
possible with user-defined mode, when UDCM bit T1ET2 = 0. Matches are generally not ordered, except 
on specific ordered match modes m2_o_st and m2_o_dt. Match capture(s) never overrides a Transition 
capture, while Transition captures can always override a Match capture, either in predefined or 
user-defined modes.

The following general rules apply to both predefined and user-defined modes:

•

Blocking of one Match by the other, when it occurs, is done through MRLEs.

•

Matches always block themselves by resetting their own MRLEs (Match A always blocks Match 
A, Match B always blocks Match B).

Predefined modes differ mostly by the way matches affects and are affected by other matches and 
transitions, as explained in next sections. However, some general rules on Match blocking apply: 

•

Match B is blocked by first transition (TDLA) in single transition modes, and by second transition 
(TDLB) in double transition modes.

•

Both Matches are blocked by first transition in single transition modes.

NOTE

The rules above and in following sections may be overruled by the state of 
the channel latches if they are set/reset by microcode or if channel mode is 
changed. Care must be taken to change channel modes, and is advisable to 
reset channel flags MRLA/B, TDLA/B and MRLEA/B before writing 
PDCM, or to UDCM when user-defined mode is selected.

Содержание MPC5644A








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов