manualshive.com logo in svg

NXP Semiconductors MPC5644A, Справочное руководство, Страница: 105 / 1735

Поделиться
Скачать
NXP Semiconductors MPC5644A Скачать руководство пользователя страница 105

Operating Modes and Clocking

MPC5644A Microcontroller Reference Manual, Rev. 6

Freescale Semiconductor

105

 

Chapter 5  
Operating Modes and Clocking

5.1

Overview

This section gives a brief overview of the operating modes of this device.

5.2

Modes of operation

5.2.1

Normal mode

Normal Mode is the functional mode of this device.

5.2.2

Debug mode

Debug Mode provides access to powerful debugging and development features of this device. The debug 
and development features are distributed between Nexus blocks in the e200z4 core, eDMA and the eTPU, 
and some of the peripheral modules. The Nexus debug and development features are described in 

Chapter 37, Nexus Port Controller (NPC)

.

The peripheral blocks that implement Debug Mode are:

•

DSPI B, DSPI C, DSPI D

•

FlexCAN A, FlexCAN B, FlexCAN C

•

eMIOS

•

eQADC

•

eTPU (referenced as Halt State in 

Chapter 24, Enhanced Time Processing Unit (eTPU2)

)

See the “Modes of Operation” section of the individual module for a description of how the Debug Mode 
affects the behavior of the module.

5.2.3

Low power modes

This device can be configured such that the clock to some or all of the modules can be stopped to reduce 
the power consumption. A tiered approach towards clock gating is implemented. In the first tier (Module 
Disable mode) some modules can be configured to stop the clock to the non-memory mapped registers 
within the module. In the second tier (Module Halt mode) the clock to each of the modules, including the 
CPU, can be completely stopped.

5.2.3.1

Module disable mode

Module Disable Mode is a low-power mode supported by some of the modules on this device, in which 
the clock to the non-memory mapped registers within the module is gated-off. 

Table 5-2

 lists the modules 

that support Module Disable Mode. The register and bit in each module that must be written to enter or 

Содержание MPC5644A








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов