manualshive.com logo in svg

NXP Semiconductors MPC5644A, Справочное руководство, Страница: 1219 / 1735

Поделиться
Скачать
NXP Semiconductors MPC5644A Скачать руководство пользователя страница 1219

Decimation Filter

MPC5644A Microcontroller Reference Manual, Rev. 6

Freescale Semiconductor

1219

 

•

The leftmost block, named Head. receives the raw data to be filtered from the PSI master block (or 
from the device slave-bus interface in standalone/PSI output modes). The head type is configured 
using CASCD[1:0] = 01 in the configuration register DECFILTER_MCR. 

•

The rightmost block, named Tail, is the last filter block in the chain. It sends the output result back 
to the PSI master block (or to the device slave-bus interface in standalone/PSI input modes). This 
type of cascaded block is configured using CASCD[1:0] = 10. 

•

The blocks in between, named Middle, do not exchange data (receive / transmit) with the PSI 
master, only with other decimation filter blocks. This type of block is configured by setting 
CASCD[1:0] = 11. Middle blocks are optional in a cascaded combo: two blocks, one Head block 
feeding a Tail one, can be used in cascade.

NOTE

The values passed between cascaded blocks can be monitored using 
Enhanced Debug Monitor (see 

Section 26.5.14, Enhanced debug monitor 

description

”).

•

Each decimation filter block has one cascade-in and one cascade-out ports, besides the PSI 
connections used in normal mode. The format of the cascade bus is described in 

Section 26.5.16.2, 

Cascade Mode Data/Control Bus description

”. The arrows show how they are physically 

connected. The bold arrows show the connections used in cascade mode.

•

The block configurations as Head, Tail or Middle must respect their physical connections such that 
all the following apply:
— a Head block feeds a Middle or Tail one
— a Middle block feeds another Middle block or a Tail one
— Tail feeds no other block, and Head is fed by no other block.

•

As a consequence of the conditions above, there must be one and only one Head block and one and 
only one Tail block in a cascade combo.

•

A group of physically chained blocks can form more than one cascade combo. For instance, 

Figure 26-21

 shows the same physical chain, but now with blocks 1 and 2 configured as Head and 

Tail, respectively, forming one combo. The remaining blocks form another combo starting with 
block 3 (Head), and ending with block N (Tail). Note that the chain-in inputs of blocks from block 
3 on are used to carry output data from the first cascaded combo (Tail block 2) to the PSI master 
block.

•

Blocks not used in a cascaded chain can be used normally, isolated (DEFILTER_MCR field 
CASCD[1:0] = 00), as exemplified in 

Figure 26-22

.

•

The optional connection show from block N to block 1 in 

Figure 26-20

 allows block N to be 

configured as Head or Middle, feeding block 1 configured as Middle or Tail, yielding more 
flexibility, as in the last example of 

Figure 26-22

.

Содержание MPC5644A








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов