manualshive.com logo in svg

NXP Semiconductors MPC5644A, Справочное руководство, Страница: 1537 / 1735

Поделиться
Скачать
NXP Semiconductors MPC5644A Скачать руководство пользователя страница 1537

FlexRay Communication Controller (FlexRay)

MPC5644A Microcontroller Reference Manual, Rev. 6

Freescale Semiconductor

1537

 

Common configuration data

The set of common configuration data for individual message buffers is located in the following registers.

•

Message Buffer Data Size Register (FR_MBDSR)

The MBSEG2DS

 

and MBSEG1DS fields define the minimum length of the message buffer data 

field with respect to the message buffer segment.

•

Message Buffer Segment Size and Utilization Register (FR_MBSSUTR)

The LAST_MB_SEG1 and LAST_MB_UTIL fields define the segmentation of the individual 
message buffers and the number of individual message buffers that are used. For more details, see 

Section 33.6.3.1.1, Individual message buffer segments

”

Specific configuration data

The set of message buffer specific configuration data for individual message buffers is located in the 
following registers.

•

Message Buffer Configuration, Control, Status Registers (FR_MBCCSRn)

The MCM, MBT, MTD bits configure the message buffer type.

•

Message Buffer Cycle Counter Filter Registers (FR_MBCCFRn)

The MTM, CHA, CHB bits configure the transmission mode and the channel assignment. The 
CCFE, CCFMSK, and CCFVAL bits and fields configure the cycle counter filter.

•

Message Buffer Frame ID Registers (FR_MBFIDRn)

For a transmit message buffer, the FID field is used to determine the slot in which the message in 
this message buffer will be transmitted.

•

Message Buffer Index Registers (FR_MBIDXRn)

This MBIDX field provides the index of the message buffer header field of the physical message 
buffer that is currently associated with this message buffer. 

33.6.3.5

Individual message buffer control data 

During normal operation, each individual message buffer can be controlled by the control and trigger bits 
CMT, LCKT, EDT, and MBIE in the 

Message Buffer Configuration, Control, Status Registers 

(FR_MBCCSRn)

. 

33.6.3.6

Receive shadow buffer configuration data

Before frame reception into the individual message buffers can be performed, the receive shadow buffers 
must be configured. The configuration data are provided by the 

Receive Shadow Buffer Index Register 

(FR_RSBIR)

. For each receive shadow buffer, the application provides the message buffer header index. 

When the protocol is in the 

POC:normal active

 or 

POC:normal passive

 state, the receive shadow buffers 

are under full CC control.

33.6.3.7

Receive FIFO control and configuration data

This section describes the configuration and control data for the two receive FIFOs.

Содержание MPC5644A








































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов