3.5 Programming the Setup Functions
3.5.8 Erase Data ([MENU] Button
_
Setup
_
Erase Data)
The Erase Data function is used to reset only the ‘FUNCTION’ programming to the factory
default. The ‘CAMERA’ programming such as, Focus Control, WB Control, or AE Control
will not be affacted.
All ‘FUNCTION’ programming such as Presets, Patterns, Scans,
or Tours WILL BE LOST!
1. Press the [Menu] button on the Controller Keyboard. Select the ‘SETUP’ option. Scroll
down to ‘ERASE DATA,’ then press the Joystick handle to the right to access the sub-
menu.
2. Upon entering the sub-menu, you will be prompted to erase the programmed data.
Press the [ENTER] or the [MENU] button for ‘YES,’ or [ESC] button for ‘NO.’
Note:
You must ‘SAVE AND EXIT’ to finalize the programming, pressing [ESC] button
while programming will exit programming without saving. If the PTZ dome camera’s
OSD menu is being access through the DVR, access the PTZ menu and press the [ESC]
button on the DVR or [E] button on the EV Series DVR.
ERASE PROGRAMMED DATA
ARE YOU SURE : (Y/N)
YES : ENTER
NO : ESC KEY
OR MENU KEY
