0
3.1.4 Scan ([MENU] Button
_
Function
_
Scan [Scan])
The Scan function is designed to store and memorize 2 specific points of the surveillanced
perimeter--the START point and the END point. Once programmed, the EasyTrak™ PTZ
dome camera will start the scan from the designated start point and move horizontally or
diagonally to the end point and back in the predetermined speed. ([0~16]
_
[Scan]).
>> To program the ‘SCAN,’ please follow the instructions below.
1. Press the [Scan] button to display the PTZ Scan menu. ([Menu] Button
_
Function
_
Scan Shortcut: [Scan])
2. Select an empty Scan slot (START and END field should read ‘NONE’). The ‘SCAN 01’ is
named automatically. A new custom name may be entered by twisting the Joystick handle.
3. Move the cursor down to the ‘SPEED’ option and determine the scanning speed.
Note:
The number speed setting of (1-8) allows for horizontal panning only. For diagonal
Scan, use the either the ‘Slow,’ or the ‘Medium’ setting.
3.1 Programming the PTZ Functions
SPEED:
1 (Slower)~8 (Faster)
SPEED:
Slow~ Medium (DiagonalScan capable)
START:
Designated Start point
END:
Designated End point
DIRECTION:
CW(Clockwise) or CCW(Counter Clockwise)
SWAP:
Swaps the START point and END point
SCAN MENU 01/16
SCAN 01 : AUTOSCAN01
SPEED : 1~8/SLW/MID
START : NONE
END : NONE
DIR. : CCW
SWAP : OFF
SAVE AND EXIT
