7
CAMERA DEFAULT
ARE YOU SURE : (Y/N)
YES : ENTER
NO : ESC KEY
OR MENU KEY
3.5 Programming the Setup Functions
3.4.5 Camera Default ([MENU] Button
_
Camera
_
Camera Default)
The Camera Default function is used to reset only the ‘CAMERA’ programming to the
factory default setting.
This function will NOT erase the ‘FUNCTION’ programming,
such as Presets, Patterns, Scans, or Tours.
1. Press the [Menu] button on the Controller Keyboard. Select the ‘CAMERA’ option.
Scroll down to ‘CAMERA DEFAULT,’ then press the Joystick handle to the right to access
the sub-menu.
2. Upon entering the sub-menu, you will be prompted to reset to factory default. Press
the [ENTER] or the [MENU] button for ‘YES,’ or [ESC] button for ‘NO.’
Note:
You must ‘SAVE AND EXIT’ to finalize the programming, pressing [ESC] button
while programming will exit programming without saving. If the PTZ dome camera’s
OSD menu is being access through the DVR, access the PTZ menu and press the [ESC]
button on the DVR or [E] button on the EV Series DVR.
