8
3.1.3 Pattern ([MENU] Button
_
Function
_
Pattern [Pattern])
The Pattern function is designed to store and memorize complicated movements of the
EasyTrak™ PTZ dome camera for up to 240 seconds. Once programmed, pressing the
combination of [0~4] number buttons followed by the [Pattern] button on the Controller
Keyboard ([0~4]
_
[Pattern]) will automatically recall the predefined pattern.
>> To program the ‘PATTERN,’ please follow the instructions below.
1. Press the [Pattern] button to display the PTZ Pattern menu. ([Menu] Button
_
Function
_
Pattern Shortcut: [Pattern])
2. Select an empty Pattern slot (SEC must read ‘000’). While pressing down the [Shift]
button, move the Joystick in a desired pattern for up to 240 seconds (For zoom operation,
twist the Joystick handle), then release the [Shift] button to record the pattern.
Alternatively, the Pattern recording can also be initiated by twisting the Joystick handle.
Once the PTZ dome camera has been moved in a desired pattern, press the [Near] or
[Far] button to end the recording.
Note:
If the total recording time reaches 240 seconds, it will automatically stop for a
moment and re-start the recording again. Previous data will be over written.
3.1 Programming the PTZ Functions
PATTERN SETUP
NO. TITLE SEC
01 : xxxxxxxxxxxxxxxx 000
02 : xxxxxxxxxxxxxxxx
03 : xxxxxxxxxxxxxxxx
04 : xxxxxxxxxxxxxxxx
TOTAL RECORDS : 000
SAVE AND EXIT
