3.1.5 Tour (Continued)
4. By default, the ‘NO’ slot will automatically be set to ‘01.’ Move the cursor over to ‘NO’
and define the function number by scrolling through the available programmed functions.
5. The speed and the dwell time is automatically fill-out to the default setting of Slow and 3
seconds. You may customize these option by moving the cursor over to the ‘S’ or the ‘DW,’
and selecting a different speed and dwell time.
Note:
The ‘S’ and ‘DW’ is the speed and dwell time between the selected functions.
6. Repeat steps 3~5 for each available slot until the desired Tour is entered.
7. Finish the Tour programming by scrolling down to the bottom to ‘SAVE AND EXIT.’
Note:
You must ‘SAVE AND EXIT’ to finalize the programming, pressing [ESC] button while
programming will exit programming without saving. If the PTZ dome camera’s OSD menu
is being access through the DVR, access the PTZ menu and press the [ESC] button on the
DVR or [E] button on the EV Series DVR.
Deleting the Programmed Tour -
To delete a programmed Tour, press [Home] or [DEL]
button while highlighting the undesirable Tour.
3.1 Programming the PTZ Functions
