7
3.1.2 Preset (Continued)
4. You may enable or disable the FOCUS, IRIS, BLC, or WDR fields by twisting the Joystick
handle while the cursor is over their respective fields. (A=Automatic, M=Manual, F=OFF,
O=On)
5. Move the cursor over to the ‘TITLE’ field, enter the custom name for the Preset. Using the
Joystick, navigate the 16-digit title space twisting the Joystick handle to scroll through the
alphanumeric characters.
6. Finish the Preset programming by scrolling down to the next empty slot, or all the way to
the bottom to ‘SAVE AND EXIT.’ Should you want to program another Preset, simply repeat
steps 2~5 while highlighting the next empty Preset slot.
Note:
You must ‘SAVE AND EXIT’ to finalize the programming, pressing [ESC] button while
programming will exit programming without saving. If the PTZ dome camera’s OSD menu
is being access through the DVR, access the PTZ menu and press the [ESC] button on the
DVR or [E] button on the EV Series DVR.
Deleting the Programmed Preset -
To delete a programmed Preset, press [Home] or [DEL]
button while highlighting the undesirable Preset.
Overwriting the Programmed Preset -
Overwriting the programmed Preset is possible
without having to go through the camera’s OSD main menu. Pressing [0~248] button
followed by [Preset] button respectively, recalls the programmed Preset position; however,
pressing the [Shift] button in between the two buttons ([0~248]
_
[Shift]
_
[Preset]) will
re-programs the Preset to the current view.
Preset Programming Shortcut -
The reprogramming method described above can also be
used as a shortcut method of programming the Preset. Simply press [1~248] to designate a
Preset number, followed by [Shift] then [Preset] button to program the Preset.
Note:
If the selected Preset slot is occupied, you will be prompted to overwrite the existing
Preset.
3.1 Programming the PTZ Functions
